Call Garreth, Cameron and Jack: 0115 647 8650

Free UK shipping on all orders over £100.00

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.
Free UK delivery over £100
Klarna available at checkout
Established 2003, Nottingham showroom
Call the team: 0115 647 8650

Our Top Recommended Big Brake Upgrade Kits For Your Volkswagen Bora

Brembo make one big brake kit for the Bora, and it fits more than just the Bora. The PQ34 platform runs the same front hub geometry across the Bora saloon, the Bora Variant estate, the Golf IV and the New Beetle, so one caliper and disc covers the whole family. That is not a marketing claim; it is a cataloguing fact, and it means your Bora gets exactly the same hardware as a Golf IV owner orders, at the same price. Tarox and HiSpec do not list a front kit for this car. We have checked both catalogues. If you want a big brake upgrade on a Bora, this is the route.

One kit, one price. The only question is whether you are ordering for the saloon or the estate and which engine you have, because that determines which bracket Brembo build into the kit. Get that right and everything bolts to the standard hubs without any modification. The full Bora brake range is on the site if you want to browse before reading on.

  • One 323x28mm kit covers the whole Bora range, saloon and Variant estate
  • Cross-drilled one-piece disc with a four piston GT-A caliper from Brembo Italy
  • Complete kit: Brembo pads, braided lines, mounting brackets and all hardware included
  • Caliper in black, red or silver, set by the last digit of your part number
  • Made to order in Italy, six to eight weeks
Volkswagen Bora saloon in deep red on a race circuit, lowered with dark alloy wheels, body kit and Brembo big brake upgrade installed
The Volkswagen Bora. One Brembo GT-A kit covers the saloon and the Variant estate, with engine-specific brackets to suit each variant.

Brembo alone on this car

We checked Tarox and HiSpec before putting this page together, because the rules here are strict: you do not write a brand has nothing for a car without running the catalogue. Neither brand lists a front kit for the Bora. HiSpec cover most cars in the 1990s and early 2000s VW group family but the Bora is not one of them. Tarox list several VW models from this generation but the Bora is not among them either. That leaves Brembo, and on this car Brembo is the right answer.

IT

Brembo GT-A

Made to order in Italy, six to eight weeks from the date of order. The GT-A is Brembo's two-piece caliper design, derived from their original equipment work: the easiest of the GT family to install and the right choice for a road car that sees occasional track use. Four piston aluminium caliper, 323x28mm one-piece cross-drilled disc, Brembo's own pads and braided lines all in the box. Caliper colour is a free option: black, red or silver, set by the last digit of the part number when you order.

VW

PQ34 platform

The Golf IV, Bora saloon, Bora Variant estate and the New Beetle all share the same front hub geometry. Brembo make one front brake kit and it fits all four of them: the same caliper, the same disc, the same bracket dimensions. What changes is the fitting hardware matched to your specific engine and body style. One part number family covers the entire range, which is correct engineering, not a shortcut.

No Tarox or HiSpec for this carNeither brand lists a front big brake kit for the Bora. If you have heard otherwise, drop us an email or click to open a chat and we will confirm it with the catalogue before you spend anything. Garreth checks both brands regularly and neither has added a Bora-specific listing since this page was written.

Wheel clearance and the A, B, C dimensions

Brembo do not publish a simple minimum wheel size figure for this kit the way HiSpec do. What they do publish is a caliper clearance drawing, available as a PDF download on the product listing, with three dimensions labelled A, B and C. Those three measurements describe the space the caliper occupies against the wheel: the radial clearance (A), the axial clearance from the wheel face to the caliper body (B), and the spoke clearance depth (C). A wheel of the right diameter can still foul the caliper if the spokes sit too close to the disc face, and C is the measurement that catches that.

Cameron’s corner of the business is wheel clearance, because it is a conversation, not a table lookup. If you are on factory alloys that came with the car, send us the size and we will read the drawing against it. If you are on aftermarket wheels, tell Cameron the make, model and offset as well. Getting that checked before the kit is ordered is a lot easier than dealing with it after.

KitDisc specMinimum wheelHow we check it
Brembo GT-A 323mm323 x 28mmSee Brembo's clearance drawingDrop us the wheel size, make and offset
The clearance drawing is on the product pageEvery Brembo GT listing for the Bora carries a downloadable PDF with the A, B and C dimensions for the 1A46001A caliper. Open the product, scroll to the downloads section and it is there. If you need help reading it against your specific wheel, drop us an email or click to open a chat and we will work through it with you.

Bora saloon 323mm GT-A

The saloon listings cover the standard Bora four door body. Brembo list by engine variant, because the bracket geometry differs between the V5 and the V6 4motion even though the caliper and disc are identical. The new format listing covers the 2.3i V5 from 1998 to 2004. The V6 4motion runs its own part number. Either way you are getting the same 323x28mm one-piece disc and the same four piston GT-A caliper. The difference is in the bracket, and you need the right one for your engine.

If your Bora saloon runs the 1.8 20V Turbo, the 1.9 TDi or the 2.0 litre, there are additional engine-specific listings in the range page. All of them carry the same hardware at the same price. Ring us or use the chat if you are not sure which one to order.

  • £1,833.65 inc VAT per listing, all engine variants
  • 323 x 28mm cross-drilled one-piece disc
  • Four piston GT-A caliper, two-piece aluminium body
  • Brembo pads, braided lines, brackets and hardware included
  • Caliper in black, red or silver, set when you order

Bora Variant estate 323mm GT-A

The Variant estate shares the saloon’s front hub geometry, so the disc and caliper are the same. Brembo list the Variant separately from the saloon because the bracket mounts at a slightly different point on the subframe. Order the Variant listing rather than the saloon and the fitment is correct first time. Garreth has had calls where someone picked the wrong body style and needed to swap the kit back out; it is a one-word difference in the listing title and an easy thing to miss.

Three engine variants are listed for the Variant: the 1.9 TDi in the new format from 2000 to 2004, the 1.8 20V Turbo, and the 2.8i V6 24V 4motion. The two-door Variant with the 2.3i V5 also has its own listing in the range. All four are the same kit with the right bracket for that car.

  • £1,833.65 inc VAT, all Variant engine variants
  • Variant-specific bracket, not interchangeable with the saloon
  • Same 323 x 28mm disc and GT-A caliper as the saloon listing
  • Six to eight weeks, made to order in Italy
  • Send us your registration and engine code if you are not sure which listing to order

The Golf IV and Beetle: the same part fits them too

We stock the same Brembo kit under Golf IV and New Beetle listings in our catalogue. The caliper and disc are identical: 1A46001A is the part number family and it covers the whole PQ34 family. If you also run a Golf IV or a Beetle, or if you are rebuilding a car that has been rebadged between those models, the parts are interchangeable at the disc and caliper level. The brackets are body-specific, so you still need the right listing for the car the kit is going on.

Brembo’s own documentation confirms this across their range. One part number often covers four or five vehicles, because it is the same hardware built to one specification, not a kit adapted from a different car. On this platform, that is a genuine advantage: the kit has been designed and validated for this exact hub, not borrowed from something else and made to fit.

Ordering for a Golf IV or Beetle?Use the Golf IV or Beetle listing, not the Bora listing. The kit hardware is the same but the listing carries the correct bracket designation for that body. If you need help matching the right listing to your car, drop us an email or click to open a chat.

What is in the kit

Brembo GT kits arrive more complete than most of the kits in this series. Unlike HiSpec, where pads and braided hoses are priced separately so you choose the compound, the Brembo kit includes both. You are paying for a finished system ready to bolt on, and the price reflects that.

In the kitBrembo GT-A 323mm
CalipersFour piston GT-A, two-piece aluminium body
Discs323 x 28mm one-piece cross-drilled, with mounting bells
Brackets and hardwareIncluded, engine-specific
Braided brake linesIncluded
PadsBrembo pads included
Caliper finishBlack, red or silver, set by last digit of part number
Built inItaly, made to order, six to eight weeks
These are front kitsEverything here converts the front axle. The front axle does most of the braking on a road car, so this is the right place to start. If you are planning a rear upgrade to match, talk to us before ordering and we will spec the pair together so the brake balance stays right.

Every listing compared

ListingBodyEngineYearsKitPrice inc VAT
Bora 2.3i V5Saloon2.3i V51998 to 2004323mm GT-A£1,833.65
Bora 2.8i V6 4motionSaloon2.8i V6 24V 4motion1999 to 2004323mm GT-A£1,833.65
Bora Variant 1.9 TDiVariant estate1.9 TDi (96/110kW)2000 to 2004323mm GT-A£1,833.65
Bora Variant 1.8 20V TurboVariant estate1.8 20V Turbo2000 to 2004323mm GT-A£1,833.65
Bora Variant 2.8i V6 4motionVariant estate2.8i V6 24V 4motion1999 to 2004323mm GT-A£1,833.65
Golf IV 1.8 20V Turbo GTIGolf IV (same hub)1.8 20V Turbo GTI2000 to 2004323mm GT-A£1,833.65
Golf IV 2.8i V6 4motionGolf IV (same hub)2.8i V6 24V 4motion1999 to 2004323mm GT-A£1,833.65

Prices include VAT and were correct on 6 October 2026. All listings are for the front axle. The hardware is identical across every row: same disc, same caliper, engine-specific brackets. The Bora Variant 2.3i V5 and any 1.8T saloon listings are also available in the range; the table shows the new-format listings we recommend ordering from where available.

Data note: one old listing has a title mismatchOur product 2468 is titled "Bora Variant TD 1.9 TDi" but its Compatible Model attribute says "Bora Variant 1.8I 20V Turbo". We have flagged this to the catalogue team. For the 1.9 TDi Variant, use the new-format listing (product 17160) which has the correct title and attributes. For the 1.8 Turbo Variant, use product 2458. Do not rely on product 2468 until the title is corrected.

Common questions

Why does Brembo list the kit by engine variant?

The caliper and disc are the same across the whole Bora range, but the bracket that mounts the caliper to the upright is machined to the exact geometry of that engine and body combination. A 2.3i V5 saloon and a 2.8i V6 4motion Variant have different subframe and hub dimensions, so they need different brackets even though the brake hardware is identical. Pick the listing that matches your car and the bracket arrives already paired correctly.

Why no Tarox or HiSpec option for the Bora?

Neither brand has published a front big brake kit for the Bora in their current catalogues. We checked both before writing this page, by vehicle category and by model name search, because our own rules are strict on this. If either brand adds coverage in future, we will update this page. For now, Brembo is the only route we can honestly recommend.

How long does the kit take to arrive?

Six to eight weeks from the date you order, made to order in Italy. If you are planning for a specific event or track day, order with that in mind and let us know the date when you place the order so we can check the current lead time at Brembo's factory. Lead times can run closer to the lower end outside peak season and slightly longer during busy periods.

Can I choose a different disc face?

The kit ships with cross-drilled discs. If you need to confirm whether a slotted option is available for the 1A46001A part, drop us an email or click to open a chat and we will check it with Brembo before anything is ordered. Do not assume a variant is available without checking first, because Brembo's part number suffix controls this and not all disc face options are listed on every application.

Do I need to change anything else on the car?

The kit bolts to the standard hubs and uses the existing wheel studs. What you do need is brake fluid that can handle higher temperatures, because the caliper generates more heat than the standard items. Brembo recommend a full flush with a suitable fluid before the first drive, and a gentle bedding-in run before any hard use. The braided lines in the kit replace the standard rubber hoses on the front axle.

What we would actually fit

On a Bora, the answer is simpler than on most cars in this series. There is one kit and one price. Garreth’s honest view is that a 323mm four piston kit on a car that weighs around 1,300kg and was never sold with more than 204bhp is a meaningful upgrade over the standard sliding calipers, and well within what the car’s balance can handle. You are not fitting a kit designed for something heavier; you are fitting Brembo’s system built specifically for this platform.

The only thing to get right before ordering is the listing. Saloon or estate, and which engine. That is Cameron’s first question when we get a Bora enquiry, because everything else flows from it. If you are not sure, ring us on 0115 647 8650 with the registration and he will pull up the right listing. It takes about two minutes.