Call Garreth, Cameron and Jack: 0115 647 8650

Free UK shipping on all orders over £100.00

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.
Free UK delivery over £100
Klarna available at checkout
Established 2003, Nottingham showroom
Call the team: 0115 647 8650

Our Top Recommended Big Brake Upgrade Kits For Your Jaguar XF

How big a brake can you put on the front of a Jaguar XF? We list three Brembo front kits for the XF, 2016 to 2024. Each one puts a 380x34mm two-piece disc and a six piston caliper on the front axle. The disc and the piston count are the same on all three, so the choice you make is the caliper, and the kit needs a 19 inch wheel.

  • Kits and prices checked against the live site on 10 November 2026
  • Made to order in Italy, 6 to 8 weeks
  • Wheel size from the TAROX and Hi Spec figure for a 380mm disc
Dark blue Jaguar XF saloon on bronze multi-spoke wheels with red brake calipers, on track at a British circuit
A modified XF on track, with bronze aftermarket wheels and red calipers front and rear.
Garreth's top tip for most XFs

Brembo GT-M 380mm, six piston monobloc

£4,662.68inc VAT, front axle kit

Listed for the Jaguar XF, 2016 to 2024, front axle.

  • Monobloc caliper, built for road use and track days
  • 380x34mm two-piece discs, cross-drilled or Type 3 slotted
  • 19 inch is the smallest wheel for a disc this size
  • Made to order in Italy, 6 to 8 weeks
3Brembo front kits listed
380x34mmTwo-piece disc on all three
19 inchSmallest wheel
6 to 8 wksMade to order in Italy

Which XF do you have

Check the year first. Our three Brembo listings give the car as the Jaguar XF, 2016 to 2024, and Brembo’s drawing for the kit is titled 2016+ Jaguar XF, front. This is what the listings say about fitment:

  • Make and model: Jaguar XF
  • Years: 2016 to 2024
  • Axle: front
  • Base part number: 1N19056A cross-drilled, 1N39056A Type 3 slotted

The listings cover the XF by year and do not split it by engine or trim. Hub design, the shape of the disc bell and the caliper brackets are specific to the car, even when the disc size looks the same. If your XF sits close to either end of that range, or it is an unusual variant, send us the registration and Cameron confirms the exact kit before you order.

An XF built before 2016?These three kits are listed from 2016, and they are every kit in our XF category. For an earlier car, send us the registration and Cameron will check what we can offer for it before anything is ordered. Drop us an email or click to open a chat.

The three Brembo kits and what changes between them

Every kit we list for the XF is a Brembo. We checked the XF category and searched the TAROX and Hi Spec ranges by name, and neither has a kit for this car on our site.

The three share most of their parts list. Each is a front axle kit with six piston calipers and 380x34mm two-piece discs on bells, and each comes with the disc face cross-drilled or Type 3 slotted. The base part number is the same too. Where they differ is the caliper: how it is made and how it is finished.

Garreth's top tip

Road use and track days

GT-M monobloc

£4,662.68inc VAT

  • One-piece monobloc caliper body
  • Black, red, silver or yellow
See this kit →

Club racers and weekend track days

GT-S, hard anodised

£4,767.47inc VAT

  • Hard anodised body, logo engraved in red
  • Racing-style radiators, recessed dust seals
See this kit →

Top of the GT range

GT-R, billet and nickel

£8,906.26inc VAT

  • Machined from solid billet, nickel finish
  • Racing-style radiators, recessed dust seals
See this kit →

The GT-M is the monobloc, with a caliper body made in one piece. One piece holds its shape under heat and hard use better than a two-piece caliper does, and Brembo build the GT-M for normal road use and harder days on track. You pick the finish from black, red, silver or yellow.

The GT-S is the caliper Brembo point club racers and weekend track day drivers towards. It comes from their M6 and M4 racing calipers, with a hard anodised body, racing-style radiators on the pistons, recessed dust seals and the Brembo logo engraved in red.

The GT-R sits at the top of the GT range. Brembo machine its monobloc body from solid billet and give it a nickel finish taken from their Formula 1 and NASCAR calipers, and it carries the same radiators and recessed dust seals as the GT-S.

Wheel size: what the 380mm kit needs

19 inch is the smallest wheel for this kit.

Brembo print no minimum wheel size for their kits. TAROX and Hi Spec do. TAROX give 19 inch as the minimum wheel size on a 380mm kit of theirs, and 19 inch is the Hi Spec figure for a 380mm disc as well. Big brake kits with the same size disc all need much the same room, so 19 inch is the figure we use for the 380mm Brembo.

Brembo’s clearance drawing for the kit backs that up. It is number 1N1.9056A, a download on each product page, and it puts the top of the caliper 220.7mm from the centre of the wheel. Brembo ask for 3mm of gap in every direction, which makes 447.4mm across the inside of the wheel. An 18 inch wheel measures 457.2mm where the tyre seats, so it would leave under 5mm a side for the rim itself.

DimensionFigureWhat it tells you
C220.7mmOuter edge of the caliper, measured from the wheel centre
B134mmInner edge of the caliper, measured from the wheel centre
A49.6mmHow far the caliper sits out from the face the wheel bolts to
Gap3mmWhat Brembo ask for between the caliper and the wheel, in every direction
Cameron checks the spokes and the offsetA 19 inch wheel gets the barrel over the caliper. Whether the spokes clear the face of it comes down to spoke shape and offset, and those change from one wheel design to the next. Send us the wheel make, size and offset and Cameron checks them against the drawing. These kits are built to order, so the wheel check comes before the order.

The drawing is for the base part number, which all three kits share. The GT-R caliper has its own clearance requirement, different from the GT version. If the GT-R is the one you want, say so when you send your wheel details and Cameron checks against that caliper.

What comes in the box

Each kit does the front axle, and this is what arrives:

  • Six piston aluminium calipers
  • 380x34mm two-piece discs with bells
  • Brembo pads
  • Caliper mounting brackets
  • Braided brake lines
  • Fitting hardware

Two choices go in with the order. Every kit comes with the disc face cross-drilled or Type 3 slotted. Type 3 is the slot pattern Brembo use in professional motorsport, and it gives a strong initial bite and keeps the pad face clean as it beds in. The GT-M adds a choice of caliper finish: black, red, silver or yellow.

Contents vary slightly by application, so check the part number list on the product page against what you are ordering. Brembo’s fitting instructions are a download on the same page. Brembo ask for these kits to be fitted by a qualified technician, so pass the instructions to whoever does the work.

The three kits side by side

SpecGT-MGT-SGT-R
CaliperMonobloc, one piece of aluminiumMonobloc, from Brembo's M6 and M4 racing calipersMonobloc, machined from solid billet
FinishBlack, red, silver or yellowHard anodised, logo engraved in redNickel, as on Brembo's Formula 1 and NASCAR calipers
Caliper detailHolds its shape under heat and hard useRacing-style radiators, recessed dust sealsRacing-style radiators, recessed dust seals
Brembo build it forNormal road use and harder days on trackClub racers and weekend track daysThe top of the GT range
Pistons666
Disc380x34mm two-piece380x34mm two-piece380x34mm two-piece
Disc faceCross-drilled or Type 3 slottedCross-drilled or Type 3 slottedCross-drilled or Type 3 slotted
Part number, cross-drilled1N19056A plus finish digit 1, 2, 3 or 51N19056AS1N19056AR
Part number, Type 3 slotted1N39056A plus finish digit 1, 2, 3 or 51N39056AS1N39056AR
Pads and brake linesBrembo pads, braided linesBrembo pads, braided linesBrembo pads, braided lines
Smallest wheel19 inch19 inch19 inch, GT-R clearance checked on your wheels
MadeTo order in Italy, 6 to 8 weeksTo order in Italy, 6 to 8 weeksTo order in Italy, 6 to 8 weeks

Common questions

19 inch. Brembo print no minimum wheel size, so we use the figure TAROX and Hi Spec give for a 380mm disc, and both say 19 inch. Kits with the same size disc need much the same room. Send us your wheel make, size and offset and Cameron checks them against Brembo’s drawing before you order.

Plan on 19s. 19 inch is the TAROX and Hi Spec figure for a 380mm disc, and Brembo’s drawing points the same way. This caliper needs 447.4mm clear inside the wheel and an 18 inch wheel measures 457.2mm where the tyre seats, which leaves under 5mm a side for the rim itself. If you are choosing new wheels, tell us which ones and Cameron will check them against the drawing first.

The disc and the six pistons are the same on all three, so you are choosing a caliper. The GT-M is a monobloc in black, red, silver or yellow, built for road use and harder days on track. The GT-S has a hard anodised body with racing-style radiators and recessed dust seals, and Brembo aim it at club racers and weekend track days. The GT-R is machined from solid billet with a nickel finish and sits at the top of the GT range.

No. Brembo is the only brand with an XF kit on our site. TAROX and Hi Spec list nothing for the car.

Yes. Each kit comes with Brembo pads and braided brake lines, along with the calipers, the discs on their bells, the mounting brackets and the fitting hardware. Contents vary slightly by application, so check the part number list on the product page.

The three kits are listed for the XF from 2016 to 2024, and Brembo’s drawing is titled 2016+ Jaguar XF. For an earlier car, send us the registration before you order. Cameron will check what we can offer for it.

Around six to eight weeks. Brembo make each kit to order in Italy, and Garreth will give you the current lead time for the exact kit when you order. If the car is booked in for the work or has an event coming up, give us the date and we will tell you straight whether the kit will be here in time.

No. The front does the large majority of the braking, so a front kit is the normal first step. If you plan to upgrade the rear later and your car has an electronic parking brake, read our guide to big brake kits and electronic handbrakes before you plan that side.

What we would fit

G

Garreth

Garreth's top tip

On most XFs I would fit the GT-M. The caliper is a one-piece monobloc, and Brembo build it for a car that is driven on the road and taken on track days.

All three kits use the same 380x34mm disc and six pistons, so moving up the range changes the caliper. Go GT-S if the car does club racing or regular track days and you want the hard anodised caliper that comes from Brembo's racing range. Go GT-R if you want the billet, nickel finished caliper from the top of the GT range.

Allow six to eight weeks from Italy whichever you choose, and tell us early if the car has a date to make.

C

Cameron

Cameron's fitting view

Start with the wheels. A 380mm disc needs a 19 inch wheel, which is the figure TAROX and Hi Spec give for a disc this size. Send me the wheel make, size and offset and I check them against Brembo's drawing before the order goes in.

I also want the registration. The listings cover the XF from 2016 to 2024, and hubs, disc bells and caliper brackets are specific to the car, so I confirm the exact kit before anything is built.

Then tell me cross-drilled or Type 3 slotted, and the caliper colour if it is a GT-M. Those two choices set the part number.

Want your XF and your wheels checked before you order?

Ring us with your registration and your wheel make, size and offset. Cally, our digital receptionist, takes your details and Cameron comes back to you. Every kit is made to order in Italy, so it pays to have the wheels checked before the order goes in.