Our Top Recommended Big Brake Upgrade Kits For Your Jaguar F-Type
Which big brake kit goes on a Jaguar F-Type, and will the wheels still go over it? We list three Brembo front kits for the F-Type S, R-Dynamic, 400 Sport, V8 S, R and SVR, 2014 to 2020. All three share one 405x34mm two-piece disc and six pistons. You choose the caliper, and the kit needs a 20 inch wheel.
- Kits and prices checked against the live site on 10 November 2026
- Made to order in Italy, 6 to 8 weeks
- Wheel size from the TAROX and Hi Spec figure for a disc this size

Brembo GT-M 405mm, six piston monobloc
£5,134.20inc VAT, front axle kit
Listed for the F-Type S, R-Dynamic, 400 Sport, V8 S, R and SVR, 2014 to 2020, excluding rear-wheel drive cars.
- Monobloc caliper, built for road use and track days
- 405x34mm two-piece discs, cross-drilled or Type 3 slotted
- 20 inch is the smallest wheel for a disc this size
- Made to order in Italy, 6 to 8 weeks
Which F-Type do you have
Start with the badge on the back of the car. Our three Brembo listings name six versions of the F-Type and give the years as 2014 to 2020. Brembo’s drawing for the kit is titled Jaguar F-Type (X152), front.
- F-Type S
- F-Type R-Dynamic
- F-Type 400 Sport
- F-Type V8 S
- F-Type R
- F-Type SVR
If yours is one of those six and falls inside those years, all three kits on this page are listed for it. For a car registered at either end of that range, send us the registration. Cameron confirms the exact kit before you order.
The three Brembo kits and what changes between them
Brembo is the brand for this car: TAROX and Hi Spec list nothing for the F-Type on our site, and we checked the F-Type S category and searched both ranges by name.
The three kits have a lot in common. Each one is a front axle kit with 405x34mm two-piece discs on bells and six piston calipers, and each comes with the disc face cross-drilled or Type 3 slotted. They even share a base part number. What changes is how the caliper is made and finished.
Road and track days
GT-M monobloc
£5,134.20inc VAT
- One-piece monobloc caliper body
- Black, red, silver or yellow
Club racing and track days
GT-S, hard anodised
£5,343.76inc VAT
- Hard anodised body, logo engraved in red
- Racing-style radiators, recessed dust seals
Top of the GT range
GT-R, billet and nickel
£9,424.91inc VAT
- Machined from solid billet, nickel finish
- Racing-style radiators, recessed dust seals
The GT-M is a monobloc, so the caliper body is one piece. A monobloc holds its shape better under heat and hard use than a two-piece caliper, and Brembo build this one for normal road use and harder days on track. It comes in black, red, silver or yellow.
The GT-S comes from Brembo’s M6 and M4 racing calipers, and it is the one they point club racers and weekend track day drivers to. Its body is hard anodised, with racing-style radiators and recessed dust seals, and the Brembo logo is engraved in red as it is on their competition products.
The GT-R is the top of the GT range. Its monobloc body is machined from solid billet and given a nickel finish borrowed from the calipers Brembo make for Formula 1 and NASCAR, with the same radiators and recessed dust seals as the GT-S.
Wheel size: what the 405mm kit needs
20 inch is the smallest wheel for this kit.
Brembo do not print a minimum wheel size. TAROX and Hi Spec do, and for a kit with a 400mm disc both recommend a 20 inch wheel. Big brake kits with the same size disc all need much the same room, so that is the figure we use for the 405mm Brembo.
Brembo’s own clearance drawing for the kit (number 1N1.9541A, a download on each product page) agrees. It shows the top of the caliper sitting 231.4mm from the centre of the wheel, and Brembo ask for 3mm of gap in every direction. That makes 468.8mm across the inside of the wheel. A 19 inch wheel measures 482.6mm where the tyre seats, so it would leave under 7mm a side for the rim itself.
| Dimension | Figure | What it tells you |
|---|---|---|
| C | 231.4mm | Top of the caliper, measured from the wheel centre |
| B | 145mm | Where the caliper starts, measured from the wheel centre |
| A | 47.6mm | How far the caliper stands out from the face the wheel bolts to |
| Gap | 3mm | The clearance Brembo ask for between caliper and wheel, in every direction |
The drawing covers the base part number that all three kits share. The GT-R caliper has a different clearance requirement from the GT version. If you are going for the GT-R, say so when you send your wheel details and Cameron will check against that caliper.
What comes in the box
Each kit covers the front axle and comes with:
- Six piston aluminium calipers
- 405x34mm two-piece discs with bells
- Brembo pads
- Caliper mounting brackets
- Fitting hardware
You make two choices with the order. The disc face is cross-drilled or Type 3 slotted on every kit. Type 3 is the slot pattern Brembo use in professional motorsport, and it gives a strong initial bite and keeps the pad face clean as it beds in. On the GT-M you also choose the caliper finish: black, red, silver or yellow.
Brembo’s fitment note on all three listings says the kit does not include brake lines, and the car keeps its own. Contents vary slightly by application, so check the part number list on the product page against what you are ordering. Brembo’s fitting instructions are a download on the same page. Whoever fits the kit will want them.
The three kits side by side
| Spec | GT-M | GT-S | GT-R |
|---|---|---|---|
| Caliper | Monobloc | Monobloc, derived from Brembo's M6 and M4 racing calipers | Monobloc, machined from solid billet |
| Finish | Black, red, silver or yellow | Hard anodised black, logo engraved in red | Nickel, as on Brembo's Formula 1 and NASCAR calipers |
| Caliper detail | Holds its shape under heat better than a two-piece caliper | Racing-style radiators, recessed dust seals | Racing-style radiators, recessed dust seals |
| Brembo say | For normal road use and harder days on track | For club racers and weekend track days | Top of the GT range |
| Pistons | 6 | 6 | 6 |
| Disc | 405x34mm two-piece | 405x34mm two-piece | 405x34mm two-piece |
| Disc face | Cross-drilled or Type 3 slotted | Cross-drilled or Type 3 slotted | Cross-drilled or Type 3 slotted |
| Part number, cross-drilled | 1N19541A plus finish digit 1, 2, 3 or 5 | 1N19541AS | 1N19541AR |
| Part number, Type 3 slotted | 1N39541A plus finish digit 1, 2, 3 or 5 | 1N39541AS | 1N39541AR |
| Smallest wheel | 20 inch | 20 inch | 20 inch, GT-R clearance checked on your wheels |
| Made | To order in Italy, 6 to 8 weeks | To order in Italy, 6 to 8 weeks | To order in Italy, 6 to 8 weeks |
Common questions
What is the smallest wheel I can run with the 405mm Brembo kit?
20 inch. Brembo print no minimum wheel size, so we use the figure TAROX and Hi Spec both give for a kit with a 400mm disc, which is 20 inch. Kits with the same size disc need much the same room. Send us your wheel make, size and offset and Cameron checks the rest before you order.
My F-Type is on 19 inch wheels. Can I keep them?
We would plan on 20s. 20 inch is the TAROX and Hi Spec figure for a disc this size, and Brembo’s drawing agrees. A 19 inch wheel measures 482.6mm where the tyre seats and this caliper needs 468.8mm clear inside the wheel, which leaves under 7mm a side for the rim itself. If you are changing wheels anyway, tell us what you are looking at and Cameron will check it against the drawing first.
GT-M, GT-S or GT-R: what is the difference?
The caliper. All three use the same 405x34mm two-piece disc and six pistons. The GT-M is a monobloc in black, red, silver or yellow. The GT-S has a hard anodised body with racing-style radiators, recessed dust seals and the Brembo logo engraved in red. The GT-R is machined from solid billet with a nickel finish, and it is the top of Brembo’s GT range.
Is there a TAROX or Hi Spec kit for the F-Type?
Not on our site. We checked the F-Type S category and searched both ranges by name. Brembo is the only brand with a kit listed for this car.
My F-Type is rear-wheel drive. Do these kits fit?
The listings say excluding RWD, so check with us before you order. Send us the registration and Cameron will confirm what fits your car. The same goes for any F-Type whose badge is not one of the six named on this page.
How long does a Brembo kit take to arrive?
They are made to order in Italy and take around six to eight weeks. Garreth will give you the current lead time for the exact kit when you order. If the car is booked in somewhere or has a date to make, tell us the date and we will tell you straight whether the kit will be here for it.
Do I need to upgrade the rear brakes at the same time?
No. The front does the large majority of the braking, so a front kit alone is the normal first step. If you are thinking about the rear later and your car has an electronic parking brake, our guide to big brake kits and electronic handbrakes covers what to plan for.
What we would fit
Garreth
Garreth's top tip
For most F-Types I would go GT-M. It is a monobloc, and Brembo build it for normal road use and harder days on track.
The GT-S and GT-R sit on the same disc with the same six pistons, so moving up is a choice of caliper. Take the GT-S if the car does club racing or a lot of track days and you like the hard anodised body. Take the GT-R if you want the billet caliper at the top of Brembo's GT range.
Whichever one you pick, allow six to eight weeks from Italy and tell us if the car has a date to make.
Cameron
Cameron's fitting view
Wheels come first. A disc this size needs a 20 inch wheel, the same as the TAROX and Hi Spec kits with a 400mm disc. Send me the wheel make, size and offset and I check them against Brembo's drawing before the order goes in.
Have the registration ready as well. The listings name the S, R-Dynamic, 400 Sport, V8 S, R and SVR and exclude rear-wheel drive cars, so I confirm the exact car before anything is built.
On a GT-M tell me the caliper colour, and on every kit tell me cross-drilled or Type 3 slotted, because those two choices set the part number.
Not sure which caliper suits your F-Type?
Ring us with your registration and wheel details. Cally, our digital receptionist, takes your details and Cameron comes back to you. These kits are made to order in Italy, so a wheel check before you order saves weeks.



