Call Garreth, Cameron and Jack: 0115 647 8650

Free UK shipping on all orders over £100.00

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.
Free UK delivery over £100
Klarna available at checkout
Established 2003, Nottingham showroom
Call the team: 0115 647 8650

Our Top Recommended Big Brake Upgrade Kits For Your Porsche Cayenne

Is a big brake kit for a Porsche Cayenne the same whatever the year, or does a 955 take a different one from a 958? We list Brembo kits for three generations, the 955, the 957 and the 958, from 2003 to 2018. Each gets a 405x34mm six piston front and a 380x28mm four piston rear, and the 958 adds a 412mm eight piston front. The part number changes with the generation and the badge, and the 405mm front needs a 20 inch wheel.

  • Kits and prices checked against the live site on 12 November 2026
  • Made to order in Italy, 6 to 8 weeks
  • Wheel size from the TAROX and Hi Spec figure for a disc this size
Dark grey Porsche Cayenne 958 on gunmetal twin-spoke wheels with yellow front brake calipers, cornering on a British circuit
A modified 958 Cayenne on aftermarket wheels, with the front calipers on show.
Garreth's top tip for most Cayennes

Brembo GT-M 405mm front, six piston monobloc

£5,134.20inc VAT, front axle kit, 958 listing

Listed for the 955, the 957 and the 958. The price here is the 958 Cayenne, Cayenne S and Cayenne GTS listing, and the listing for your own car is in its section below.

  • Monobloc caliper in black, red, silver or yellow
  • 405x34mm two-piece discs, cross-drilled or Type 3 slotted
  • 20 inch is the smallest wheel for a disc this size
  • Brembo pads and braided lines in the kit, made to order in 6 to 8 weeks
3Generations covered: 955, 957 and 958
405x34mmSix piston front on every one
20 inchSmallest wheel for the 405mm front
6 to 8 wksMade to order in Italy

Which Cayenne do you have

Start with the year, then read the badge on the tailgate. Our Brembo listings split the Cayenne by Porsche’s type number, and inside each generation they name the versions the kit is for. This is how they divide it:

GenerationYearsVersions the listings nameFront 405mm base part number
9552003 to 2007Cayenne, Cayenne S, Cayenne Turbo1N19501A
9572008 to 2010Cayenne, Cayenne S, Cayenne GTS1N19501A
9572008 to 2010Cayenne Turbo (excluding Turbo S)1N19514A
9572008 to 2010Cayenne Turbo S1N19501A
9582011 to 2018Cayenne, Cayenne S, Cayenne GTS1N19523A
9582011 to 2018Cayenne Turbo1N19523A

The 955 shares its front part number with most of the 957. The 957 Turbo has its own and the 958 changes it again, so a 405x34mm disc on every row does not make the kits interchangeable. Order from the listing that names your generation and your badge. If your car was registered close to one of the changeover years, send us the registration and Cameron checks which generation it is before the order goes to Italy.

A 2019 or later Cayenne, or a version the table does not name?Our listings stop at 2018, and each one names the versions it covers. For a later car, or a badge that is not in the table, send us the registration and Cameron will check what we can offer before anything is ordered. Drop us an email or click to open a chat.

Four Brembo calipers and where each one is listed

Every kit we list for the Cayenne is a Brembo. We went through the Cayenne and Cayenne S categories and searched the TAROX and Hi Spec ranges by name, and neither has a kit for this car on our site.

The layout repeats across all three generations. The front kit is a 405x34mm two-piece disc with a six piston caliper, the rear kit is a 380x28mm two-piece disc with a four piston caliper, and both come as a GT-M, a GT-S or a GT-R. Disc and piston count stay the same across those three, and the caliper is the part you pick.

The GT-M caliper is a monobloc, machined from a single piece of aluminium. It holds its shape under heat and hard use better than a two piece caliper, and Brembo specify it for road cars that see regular track days. Of the three it is the one with a choice of colour: black, red, silver or yellow.

The GT-S comes from Brembo’s M6 and M4 racing calipers. Its body is hard anodised, the pistons carry racing-style radiators, the dust seals are recessed and the logo is engraved in red, as it is on Brembo’s competition calipers. The GT-R is machined from solid billet and nickel finished, with the same radiators and recessed seals, and it sits at the top of the GT range.

The 958 has a fourth choice, the GT-BM, which Brembo describe as their newest upgrade caliper. It is cast by a 4D process that puts the fluid passages inside the body and hides the bleed screw, so there are no external pipes to catch or damage. Brembo use it on heavier saloons, SUVs and trucks.

  • Front: eight pistons on a 412x38mm disc, the largest caliper in the GT range
  • Rear: four pistons on the 380x28mm disc
  • Colours, front and rear: black, red, yellow, white or fluorescent yellow

955, 2003 to 2007: Cayenne, Cayenne S and Cayenne Turbo

One set of listings covers all three versions of the 955. The front kits sit on base part number 1N19501A and the rear kits on 2P19001A, and Brembo’s drawing for the front is titled 03+ Porsche Cayenne. These are the three front kits:

Garreth's top tip

Road and regular track days

GT-M monobloc

£5,134.20inc VAT

  • 405x34mm disc, six pistons
  • Black, red, silver or yellow
See this kit →

From the racing calipers

GT-S, hard anodised

£5,343.76inc VAT

  • Same disc and piston count
  • Racing-style radiators, recessed dust seals
See this kit →

Top of the GT range

GT-R, billet and nickel

£9,424.91inc VAT

  • Same disc and piston count
  • Machined from solid billet, nickel finish
See this kit →

The rear kits follow the same three steps. Each one is a 380x28mm two-piece disc with a four piston caliper, and the GT-M rear comes in the same four colours as the front, so the calipers can match at both ends of the car. Every 955 kit and its price is in the table, and each price links to its listing.

955 Cayenne, Cayenne S, Cayenne TurboGT-MGT-SGT-R
Front, 405x34mm, six piston£5,134.20£5,343.76£9,424.91
Rear, 380x28mm, four piston£4,034.00£4,138.78£7,439.34

Prices include VAT. Each kit covers one axle.

957, 2008 to 2010: check for a Turbo badge first

The 957 is where the badge matters most. We have three sets of listings for it: one for the Cayenne, Cayenne S and Cayenne GTS, one for the Cayenne Turbo that says excluding Turbo S, and one for the Cayenne Turbo S. The ladder and the cards below are the front kits for the Cayenne, Cayenne S and Cayenne GTS, on base part number 1N19501A.

Garreth's top tip

Road and regular track days

GT-M monobloc

£5,134.20inc VAT

  • One-piece caliper body, four colours
  • Part number 1N19501A plus a finish digit
See this kit →

From the racing calipers

GT-S, hard anodised

£5,343.76inc VAT

  • Logo engraved in red
  • Part number 1N19501AS
See this kit →

Top of the GT range

GT-R, billet and nickel

£9,424.91inc VAT

  • Logo engraved and filled red
  • Part number 1N19501AR
See this kit →

The Turbo’s front kit has its own base part number, 1N19514A, and Brembo’s drawing for it is titled 08+ Porsche Cayenne Turbo. The Turbo S goes back to 1N19501A, the same base number as the Cayenne, Cayenne S and Cayenne GTS. On all three sets the disc, the piston count and the three caliper choices are the same, and so is the rear kit: a 380x28mm disc with four pistons on base number 2P19001A. Find the two rows with your badge and order from those.

957 versionAxle, disc and caliperGT-MGT-SGT-R
Cayenne, Cayenne S, Cayenne GTSFront, 405x34mm, six piston£5,134.20£5,343.76£9,424.91
Cayenne, Cayenne S, Cayenne GTSRear, 380x28mm, four piston£4,034.00£4,138.78£7,439.34
Cayenne Turbo (excluding Turbo S)Front, 405x34mm, six piston£5,134.20£5,343.76£9,424.91
Cayenne Turbo (excluding Turbo S)Rear, 380x28mm, four piston£4,034.00£4,138.78£7,439.34
Cayenne Turbo SFront, 405x34mm, six piston£5,134.20£5,343.76£9,424.91
Cayenne Turbo SRear, 380x28mm, four piston£4,034.00£4,138.78£7,439.34

Prices include VAT. Each kit covers one axle.

958, 2011 to 2018: four front kits, one with eight pistons

The 958 has the longest list. The Cayenne, Cayenne S and Cayenne GTS share one set of listings and the Cayenne Turbo has its own. Both get the 405mm six piston front as a GT-M, GT-S or GT-R on base part number 1N19523A, and both get the 412mm eight piston GT-BM on 1Q19613A. These are the four front kits for the Cayenne, Cayenne S and Cayenne GTS:

Garreth's top tip

Road and regular track days

GT-M monobloc

£5,134.20inc VAT

  • 405x34mm disc, six pistons
  • Black, red, silver or yellow
See this kit →

From the racing calipers

GT-S, hard anodised

£5,343.76inc VAT

  • 405x34mm disc, six pistons
  • Racing-style radiators, recessed dust seals
See this kit →

Eight pistons, 958 only

GT-BM 412mm

£6,024.82inc VAT

  • 412x38mm disc, eight pistons
  • Five colours, needs a 21 inch wheel
See this kit →

Top of the GT range

GT-R, billet and nickel

£9,424.91inc VAT

  • 405x34mm disc, six pistons
  • Machined from solid billet, nickel finish
See this kit →

Garreth’s advice on a 958 is to settle the wheels before the caliper. The GT-M, GT-S and GT-R all go inside a 20 inch wheel, and the eight piston GT-BM needs a 21. If the car is already on 21s, or you are buying wheels anyway, the GT-BM is open to you. If it is staying on 20s, choose from the other three.

There are four rear kits as well, all on the 380x28mm disc with four pistons: GT-M, GT-S, GT-BM and GT-R. The Turbo’s rear kits carry different part numbers from the Cayenne, Cayenne S and Cayenne GTS, so pick the rows with your badge.

958 versionAxleGT-MGT-SGT-BMGT-R
Cayenne, Cayenne S, Cayenne GTSFront£5,134.20£5,343.76£6,024.82£9,424.91
Cayenne, Cayenne S, Cayenne GTSRear£4,034.00£4,138.78£4,138.78£7,439.34
Cayenne TurboFront£5,134.20£5,343.76£6,024.82£9,424.91
Cayenne TurboRear£4,034.00£4,138.78£4,138.78£7,439.34

Prices include VAT. Front GT-M, GT-S and GT-R: 405x34mm disc, six pistons. Front GT-BM: 412x38mm disc, eight pistons. Rear, all four: 380x28mm disc, four pistons.

Staying on 19 inch wheels: the 380mm eight piston front kit

If you want to keep 19 inch wheels, there is a smaller front kit to look at. For the Cayenne and the Cayenne S we also list a Brembo Gran Turismo front kit with a 380x34mm two-piece disc and eight piston calipers. A 380mm disc brings the smallest wheel down to 19 inch, which is the TAROX and Hi Spec figure for a disc that size.

These four listings describe the car by model and year, with no generation number on them. Two say 2003 to 2007, one for the Cayenne and one for the Cayenne S, and the other two say from 2008. Send us the registration before you order one and Cameron confirms which listing is right for your car.

Listed forYears on the listingFront kitPrice inc VAT
Cayenne2003 to 2007380x34mm disc, eight piston£4,255.90
Cayenne S2003 to 2007380x34mm disc, eight piston£4,255.90
CayenneFrom 2008380x34mm disc, eight piston£4,255.90
Cayenne SFrom 2008380x34mm disc, eight piston£4,255.90

The calipers on this kit come in black, red or silver, and the two-piece discs come cross-drilled or slotted. Pads are in the kit, along with a fitting kit where the car needs one.

Wheel size: 20 inch for the 405mm kits, 21 inch for the 412mm

20 inch is the smallest wheel for the 405mm front kit, on any of the three generations.

Brembo leave the wheel size off their kits, so we take it from the two brands that print one. TAROX and Hi Spec both put a 400mm disc inside a 20 inch wheel, and a 405mm Brembo disc needs much the same room as theirs.

Brembo’s clearance drawings point the same way. There are three for the 405mm front kit, one for each base part number, and all three put the top of the caliper 231.4mm from the centre of the wheel. Brembo ask for 3mm of gap in every direction, so the wheel has to be 468.8mm across on the inside. A 19 inch wheel measures 482.6mm where the tyre seats, which leaves under 7mm a side for the rim itself.

The 412mm GT-BM on the 958 has a bigger disc and a bigger caliper, and it needs a 21 inch wheel. Brembo’s drawing for that kit is in the table with the other three.

DrawingBrembo's titleKitTop of caliper from wheel centreClear diameter with the 3mm gap
1N1.9501A03+ Porsche Cayenne, front405mm six piston231.4mm468.8mm
1N1.9514A08+ Porsche Cayenne Turbo, front405mm six piston231.4mm468.8mm
1N1.9523A2011+ Porsche Cayenne, front405mm six piston231.4mm468.8mm
1Q1.9613A2011+ Porsche Cayenne, front412mm eight piston GT-BM244.5mm495mm

Each drawing is a download on the product page for its kit.

Send Cameron the wheel details before you orderDiameter is the first check and the spokes are the second. Whether the face of the wheel clears the caliper comes down to spoke shape and offset, and that differs from one wheel design to the next, so Cameron checks your wheels against the drawing for your kit. He needs the wheel make, size and offset. Every kit is made to order, so he does the check before the order goes in.

The rear kits use a 380mm disc, and 19 inch is the TAROX and Hi Spec figure for that size, so the rear never asks for a bigger wheel than the front does. The GT-R caliper has a different clearance requirement from the others. If the GT-R is the one you want, say so when you send the wheel details and Cameron checks against that caliper.

What comes in the box

A kit does one axle. The GT-M, GT-S, GT-BM and GT-R kits all arrive with the same list of parts:

  • Aluminium calipers: six piston on the 405mm front, eight piston on the 412mm GT-BM front, four piston on the rear
  • Two-piece discs with bells
  • Brembo pads
  • Caliper mounting brackets
  • Braided brake lines
  • Fitting hardware

You choose the disc face on every kit: cross-drilled or Type 3 slotted. Brembo use the Type 3 slot pattern in professional motorsport. It bites hard from the first touch of the pedal and keeps the pad face clean while it beds in.

Colour is the other choice. A GT-M comes in black, red, silver or yellow and a GT-BM in black, red, yellow, white or fluorescent yellow. The last digit of the part number sets the finish, so tell us the colour with the order. GT-S and GT-R calipers come in one finish each.

Brembo vary the contents a little from one application to the next, so read the part number list on the product page for your kit. The fitting instructions are a download on the same page, and Brembo ask for these systems to be fitted by a qualified technician.

The four calipers side by side

SpecGT-MGT-SGT-BMGT-R
Listed for955, 957 and 958955, 957 and 958958 only955, 957 and 958
CaliperMonobloc, machined from a single piece of aluminiumFrom Brembo's M6 and M4 racing calipersCast by a 4D process, fluid passages inside the body, hidden bleed screwMachined from solid billet
FinishBlack, red, silver or yellowHard anodised, logo engraved in redBlack, red, yellow, white or fluorescent yellowNickel, logo engraved and filled red
Caliper detailHolds its shape under heat and hard useRacing-style radiators, recessed dust sealsNo external pipes to catch or damageRacing-style radiators, recessed dust seals
Front kit405x34mm two-piece disc, six pistons405x34mm two-piece disc, six pistons412x38mm two-piece disc, eight pistons405x34mm two-piece disc, six pistons
Rear kit380x28mm two-piece disc, four pistons380x28mm two-piece disc, four pistons380x28mm two-piece disc, four pistons380x28mm two-piece disc, four pistons
Disc faceCross-drilled or Type 3 slottedCross-drilled or Type 3 slottedCross-drilled or Type 3 slottedCross-drilled or Type 3 slotted
Pads and brake linesBrembo pads, braided linesBrembo pads, braided linesBrembo pads, braided linesBrembo pads, braided lines
Smallest wheel, front kit20 inch20 inch21 inch20 inch, GT-R clearance checked on your wheels
MadeTo order in Italy, 6 to 8 weeksTo order in Italy, 6 to 8 weeksTo order in Italy, 6 to 8 weeksTo order in Italy, 6 to 8 weeks

Common questions

The sizes are the same and some of the part numbers are different. Every generation gets a 405x34mm six piston front and a 380x28mm four piston rear. The 955 and the 957 Cayenne, Cayenne S, Cayenne GTS and Turbo S use front base number 1N19501A, the 957 Turbo uses 1N19514A and the 958 uses 1N19523A. Order from the listing that names your generation and badge, or send us the registration and Cameron will point you to it.

20 inch. Brembo print no figure, so we use the one TAROX and Hi Spec give for a 400mm disc, and both say 20 inch. Brembo’s own drawings agree: the caliper needs 468.8mm clear inside the wheel, and a 19 inch wheel leaves under 7mm a side for the rim. Send us the wheel make, size and offset and Cameron checks the spoke shape against the drawing before you order.

Look at the 380mm eight piston front kit. A 380mm disc goes inside a 19 inch wheel by the TAROX and Hi Spec figure, where the 405mm kits need a 20. Its listings cover the Cayenne and Cayenne S by year, so send us the registration and Cameron confirms the right one. If you are changing wheels anyway, tell us which ones and he will check them for the 405mm kit as well.

The one for the Cayenne Turbo (excluding Turbo S), 2008 to 2010. Its front kit is on base part number 1N19514A, which no other Cayenne listing uses. The 957 Turbo S has listings of its own. If you are not sure which of the two you have, send us the registration and we will check before anything is ordered.

It is the biggest front brake we list for the car: a 412x38mm disc and an eight piston caliper, the largest in Brembo’s GT range and the one they use on heavier SUVs. You also get five colours to choose from. Garreth’s test is the wheels. The GT-BM needs a 21 inch wheel, against 20 inch for the 405mm kits, so it makes most sense on a car that is already on 21s or is getting new wheels.

No. We went through the Cayenne and Cayenne S categories and searched both ranges by name. Every kit for this car on our site is a Brembo.

Start with the front. The front axle does most of the braking, so a front kit on its own is the usual first step. When you want the rear to match, we list a 380x28mm four piston rear kit for every generation on this page, in the same caliper ranges as the front. If your Cayenne has an electronic parking brake, read our guide to big brake kits and electronic handbrakes before you plan the rear.

Allow six to eight weeks. Each kit is made to order in Italy, and Garreth confirms the lead time on your exact part number when the order goes in. If the car has to be ready by a certain date, tell us the date first and we will say plainly whether the kit can make it.

What we would fit

G

Garreth

Garreth's top tip

For most Cayennes I would fit the GT-M 405mm front. It is listed for every generation and version on this page, the caliper is a one-piece monobloc, and it is the six piston kit that lets you pick the colour.

On a 958 I would look hard at the GT-BM before deciding. Eight pistons on a 412x38mm disc is the biggest front brake we list for the car, and it is the caliper Brembo use on heavier SUVs. It does want 21 inch wheels, so budget for those with it.

The GT-S and GT-R keep the same disc and pistons as the GT-M, so moving to either one is a choice of caliper. Every kit here is built to order in Italy and takes six to eight weeks, so give us the date if the car is booked in anywhere.

C

Cameron

Cameron's fitting view

Send me the registration first. The 955, the 957 and the 958 have their own listings, the 957 Turbo has a part number to itself, and I match the kit to the car before the order goes in.

Then the wheels. A 405mm disc needs a 20 inch wheel, which is the TAROX and Hi Spec figure for a disc that size, and the 412mm GT-BM needs a 21. Give me the wheel make, size and offset and I check the spokes against the Brembo drawing for your kit.

If you are staying on 19s, tell me that as well. The 380mm eight piston front kit is the one to look at, and I confirm which of its listings is right for your year. On any kit I also need cross-drilled or Type 3 slotted, and the colour on a GT-M or GT-BM.

Want your Cayenne matched to the right listing?

Ring us with the registration and your wheel make, size and offset. Cally, our digital receptionist, takes the details and Cameron comes back to you with the kit that matches the car. Brembo build each kit to order in Italy, so the checks are best done before the six to eight weeks start.