Call Garreth, Cameron and Jack: 0115 647 8650

Free UK shipping on all orders over £100.00

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.
Free UK delivery over £100
Klarna available at checkout
Established 2003, Nottingham showroom
Call the team: 0115 647 8650

Our Top Recommended Big Brake Upgrade Kits For Your Ferrari 550 Maranello

Ferrari used Brembo calipers on the 550 Maranello as standard equipment from the first car out of the factory. The GT Series upgrade kits on this page come from the same manufacturer. You are moving up within one company’s brake range, not changing suppliers.

What changes is the specification. The standard 550 left Maranello with Brembo 4-piston calipers and 330mm front discs. The GT-M upgrade takes the front to 380x34mm with a 6-piston monobloc caliper. The GT-S adds billet machining to that. The GT-R is the hard-anodised competition-inspired version at the top. Tarox and HiSpec Motorsport do not list front brake kits for the Ferrari 550, so every option on this page is Brembo. The full Ferrari 550 Brembo range is on the site if you want to browse directly.

  • All kits on this page are Brembo GT Series: Tarox and HiSpec do not list for this car
  • Covers both the 550 Maranello (1996-2001) and the 575M Maranello (2002-2005)
  • 380x34mm front and 380x28mm rear on all three GT families
  • Made to order in Italy: six to eight weeks from order to delivery
Ferrari 550 Maranello on a racing circuit, lowered and modified for trackday use
The Ferrari 550 Maranello on track. Every Brembo kit on this page is made to order in Italy and covers both the 550 (1996-2001) and 575M (2002-2005).

Brembo on the Ferrari 550 Maranello

The 550 and 575 share the same Brembo kit numbers. That is not a shortcut in the catalogue; it reflects the fact that the bracket geometry, disc bell and caliper mounting position are the same across both cars. A listing that covers “550 / 575 (Excluding GTC)” fits both cars with the same hardware. The GTC exclusion matters: the GTC Competition version that ran at Le Mans used different brake geometry from the road car, so those competition kits are outside the scope of this guide.

Tarox and HiSpec do not currently list a front big brake kit for the Ferrari 550 or 575 range. There is no multi-brand comparison here; the choice is which Brembo family suits the car and the use.

IT

Brembo GT Series

Made to order at the Brembo factory in Italy. Three families cover the 550: GT-M (monobloc cast aluminium), GT-S (billet machined, nickel finished) and GT-R (billet, hard anodised, laser-engraved logo). Discs come cross-drilled or Type 3 slotted at the same price. Caliper colour is set by the last digit of the part number and costs nothing extra.

UK

Tarox and HiSpec

Tarox and HiSpec Motorsport do not currently list a brake kit for the Ferrari 550 or 575 Maranello. If either brand adds coverage for this car we will update this page.

Wheel clearance

Brembo publish a caliper clearance drawing for the kits on this page. The drawing gives three measurements, labelled A, B and C, covering the caliper height, depth from the disc face and caliper width. Those three figures are what determine whether a particular wheel clears.

One thing to be aware of: the GT-R caliper is a different size from the GT-S and GT-M at the same 380mm disc diameter. If you are comparing a GT-S and a GT-R, check the clearance drawing for each separately; they are not interchangeable. The drawing is linked on each product page. Cameron handles the clearance side of things and will run through the dimensions with you before anything is ordered. If you need help, drop us an email or click to open a chat and we will confirm it.

Clearance drawings are on the product pagesEach Brembo kit links to the Brembo caliper clearance PDF. If you have aftermarket wheels, tell Cameron the make, model and offset and he will check the figures before you commit.

GT-M 380mm: the front entry kit

The GT-M is Brembo’s cast monobloc caliper: machined from one piece of aluminium after casting, with no joint between the caliper body and bracket. It is the entry point of the three GT families that fit this car. At 380x34mm with a 6-piston caliper, the disc is 50mm larger in diameter than the standard 550 equipment and the caliper gains two pistons.

At £4,662.68 inc VAT, the GT-M is the least expensive front option here. The GT-S billet caliper is only £104.79 more at £4,767.47; we will come to that below and it is worth reading before deciding. The GT-M is available in Black, Silver, Yellow or Red and the disc is your choice of cross-drilled or Type 3 slotted at the same price. Both the 550 and 575 listings are in the widget below as they are the same hardware on the same bracket.

Made to order in Italy: six to eight weeks from order to dispatch.

  • £4,662.68 inc VAT
  • Fits 550 Maranello (1996-2001) and 575M Maranello (2002-2005)
  • 380x34mm two-piece disc, 6 piston monobloc caliper
  • GT-M cast monobloc, Black / Silver / Yellow / Red
  • Cross-drilled or Type 3 slotted disc at the same price
  • Made to order: six to eight weeks

GT-S 380mm: billet at nearly the same price

The GT-S uses the same 380x34mm disc and 6-piston layout as the GT-M above, but the caliper is machined from billet aluminium, not from a casting. Brembo take the same billet approach on their Formula 1 and NASCAR calipers: they machine the body from a solid block, add racing-style piston radiators and use recessed dust seals. The caliper is nickel finished.

Garreth’s view on the price gap: £104.79 separates the GT-M from the GT-S here, which is the smallest caliper-tier step we have seen in this series. On any other car in the range that step runs to a few hundred pounds. The GT-S is the sensible pick.

Six to eight weeks, made to order in Italy. Clearance drawings are on the product page; check them against your wheels before ordering.

  • £4,767.47 inc VAT
  • Fits 550 Maranello (1996-2001) and 575M Maranello (2002-2005)
  • 380x34mm two-piece disc, 6 piston GT-S billet caliper
  • Nickel finished, racing-style piston radiators, recessed dust seals
  • Cross-drilled or Type 3 slotted disc at the same price
  • Made to order: six to eight weeks

GT-R 380mm: the front flagship

The GT-R front kit is at £8,906.26 inc VAT, which is £4,138.79 more than the GT-S above. The caliper is the same billet aluminium starting point, but Brembo hard-anodise the surface rather than nickel finishing it. Hard anodising gives a harder, denser surface and is Brembo’s highest-grade surface treatment in the GT range. The logo is laser engraved and filled red, as on their competition calipers.

The GT-R uses a different caliper envelope from the GT-S at the same 380mm disc. The clearance drawing on the product page is for the GT-R specifically, not for the GT-S. If you are comparing both, check the right drawing for each. The disc spec is 380x34mm two-piece, and the caliper is 6 piston as with the other 380mm front kits.

Garreth’s honest view: the GT-R is the right kit for an owner who wants the best Brembo makes for this car and whose use justifies it. The GT-S does the same job at the track for substantially less money. The GT-R is there for the owner where cost is not the deciding factor.

Rear conversion kits

The same three families cover the rear axle of the 550 and 575. All rear kits run a 380x28mm two-piece disc with a 4-piston caliper. The disc diameter matches the front; the disc thickness drops from 34mm to 28mm, which is standard for a rear application on this car.

The GT-M rear is at £4,034.00 inc VAT. The GT-S rear is at £4,138.78, again a very small step up for the billet caliper. The GT-R rear is at £7,439.34. If you are building a complete front-and-rear conversion, the GT-S full package runs to £8,906.25 (£4,767.47 front plus £4,138.78 rear). The GT-R full package is £16,345.60.

Cameron will balance the spec across front and rear before anything is ordered. If you need help speccing the complete package, drop us an email or click to open a chat and he will confirm the combination that suits your use.

Rear kitDiscCaliperPistonsPrice inc VAT
GT-M 380mm rear380x28mm 2-pieceGT-M cast monobloc4£4,034.00
GT-S 380mm rear380x28mm 2-pieceGT-S billet4£4,138.78
GT-R 380mm rear380x28mm 2-pieceGT-R hard anodised billet4£7,439.34

What is in each Brembo kit

Every Brembo kit on this page is a complete conversion for the axle it covers. The kit includes the calipers, matched two-piece discs with bells, Brembo pads, caliper mounting brackets, vehicle-specific braided brake lines and all fitting hardware. Disc face and caliper colour are chosen at order.

In the kitAll Brembo 550 kits
CalipersGT-M (cast monobloc), GT-S (billet, nickel finished) or GT-R (billet, hard anodised)
DiscsTwo-piece with bells. 380x34mm on the front; 380x28mm on the rear.
PadsBrembo pads, included
Braided linesVehicle-specific, included
Mounting brackets and hardwareIncluded
Disc faceCross-drilled or Type 3 slotted, same price on all kits
Caliper colourGT-M: Black, Silver, Yellow, Red. GT-S and GT-R: confirm at order.
These are front kits unless the listing says rearPicks 1 to 3 above are front-axle conversions. The rear kits in the section above are sold separately. If you are planning a full front-and-rear conversion, ring Cameron on 0115 647 8650 or drop us a message before ordering so he can confirm the spec before anything is committed.

Every kit on this page compared

KitAxleDiscCaliperPistonsPrice inc VAT
GT-M 380mmFront380x34mm, 2-pieceGT-M cast monobloc6£4,662.68
GT-S 380mmFront380x34mm, 2-pieceGT-S billet, nickel finished6£4,767.47
GT-R 380mmFront380x34mm, 2-pieceGT-R billet, hard anodised6£8,906.26
GT-M 380mm rearRear380x28mm, 2-pieceGT-M cast monobloc4£4,034.00
GT-S 380mm rearRear380x28mm, 2-pieceGT-S billet, nickel finished4£4,138.78
GT-R 380mm rearRear380x28mm, 2-pieceGT-R billet, hard anodised4£7,439.34

Prices correct as at 4 October 2026 inc VAT at 20%. All kits are made to order: six to eight weeks from order to dispatch. Brembo GT Series; Ferrari 550 Maranello 1996-2001 and 575M Maranello 2002-2005 (excluding GTC).

Common questions

Do the same kits fit the Ferrari 550 and the 575M?

Yes. The 550 and 575M Maranello use the same front and rear hub geometry. Brembo list the kits under "550 / 575 (Excluding GTC)" and the hardware is identical for both cars. The GTC Competition car that raced at Le Mans had different brake geometry and is excluded from these listings, but every road 550 and 575M from 1996 to 2005 uses the same kits.

Why does the GT-S cost only slightly more than the GT-M?

The gap between GT-M (£4,662.68) and GT-S (£4,767.47) is £104.79. For most cars in our range that step runs to a few hundred pounds. At that gap, the billet GT-S is the straightforward pick unless you have a specific reason for the cast monobloc.

What is the difference between GT-M, GT-S and GT-R?

GT-M is Brembo's cast monobloc: machined from one piece after casting. GT-S is billet: machined from solid aluminium billet before any casting, nickel finished, with racing-style piston radiators and recessed dust seals. GT-R is the same billet base as the GT-S but hard anodised, not nickel finished, with a laser-engraved logo. Hard anodising is a harder surface treatment. In terms of braking performance at road and track day use, the differences come down to heat management and surface durability; the disc size and piston count are the same across all three families on this car.

Do I need to change my wheels?

That depends on your current wheels. All three GT families use a 380mm disc with different caliper envelopes; the GT-R in particular has different clearance dimensions from the GT-S at the same disc size. Brembo publish a caliper clearance drawing on each product page with the A, B and C dimensions. If you have aftermarket wheels, tell Cameron the make, model and offset and he will check the figures before you order. Ring him on 0115 647 8650.

How long is the lead time?

All Brembo GT kits are made to order in Italy. Lead time is six to eight weeks from when the order is confirmed. There is no shelf stock; every kit is built for the specific car and colour combination. We will give you a more precise indication when you order, but six to eight weeks is the working figure to plan around.

What we would actually fit

Garreth’s pick for a 550 that sees road and occasional circuit use: the GT-S front at £4,767.47, matched with the GT-S rear at £4,138.78. The complete GT-S package runs to £8,906.25 and gives you a billet Brembo front and rear for both axles. The GT-S is the sensible pick at that price gap.

The GT-R is there for the owner where specification is the primary driver and cost is secondary. Cameron has the clearance data for all three families. Give us a call on 0115 647 8650 and we will confirm the right spec for your wheels before anything is ordered.